16
Or double click the shortcut icon, to run the application software.
After modem initialized, main interface appears. When the
standby icon
appears in the taskbar, the modem can work
properly.
2.5 Hardware Uninstall
Close the software application then remove the hardware
following the procedure below.
z Firstly click the “close” button on the menu, and then click
“OK” to close the software.
z Then remove your USB Modem safely.
When you use a MicroSD card in the modem:
z Please left click the icon
in the Windows system tray
bar. Then a menu will popup and indicates the USB devices
list as below:
z Select “Safely remove the USB disk” which is relevant to
the MicroSD card.
z Pull out the USB modem directly, if you want to disconnect
the modem from the laptop or desktop PC.
To Next Page
Loading...
