81
Using the WPS(Optional)
If your client device supports WPS, you don’t have to input the password manually after WPS
has been available. Please do the following:
1. Power on your device, and enable the Wi-Fi function on your device.
2. Press and hold the WPS button on your device about three seconds to start Wi-Fi Pro-
tected Setup authentication process.
3. Enable the WPS function on your client to respond this authentication process.
4. Follow the system prompts on your client to nish the connection.
NOTE: For the detailed operations about the client, please refer to the client’s instruction.
To Next Page
Loading...
