Service and tariff management
To change your tariff, enable or disable any supplementary services, use Manage services section options.
To change your tariff or enable/disable and additional services, make as follows:
• Open WEB UI. Click on Manage Services tile.
• In section menu choose Services item.
• In the Request field enter USSD command to change your tariff or to enable/disable supplementary
service. For description of available tariff plans, available supplementary services, their descriptions and
enable/disable commands see http://modem.beeline.ru in the Tariffs and Services sections.
• After entry press Send.
Advanced features
This section briefly describes advanced features when using the 4G/Wi-Fi hotspot “Beeline”.
SMS-communication
To communicate with your friends use the services available in the 4G/Wi-Fi hotspot“Beeline”
program, Communication section. To open Communication section open WEB UI and click
on Messages tile.
Contacts
If you often exchange SMS with certain companions, save their numbers in the contact list. To
open Contacts section open WEB UI and click on Contacts tile.
Device settings
You can find your router configuration parameters in the Settings section. Do not change them without
need. Before changing them, carefully read description of the parameters.To open Settings section, open
WEB UI and click on Settings tile.
In Connection subsection of Settings section you can set data connection and choose APN profile according
with your current tariff. For more details, please, see Appendix 2. How to change APN profile.
ATTENTION!
4G/Wi-Fi hotspot “Beeline” is already configured to wirk in Beeline network. Do not change
profile settings if not necessary. Incorrect profile settings may lead to an inability to establish
connection to the Internet.
In Network section you can set network priority and change network access settings. Be careful when
change network settings. Do not change network settings if not necessary. Incorrect network settings may
lead to lose network signal or to limited service of network.
In Wi-Fi section you can manage main and advanced Wi-Fi settings and activate WPS function.
To Next Page
Loading...
