Note: If for any reason the Wi-Fi Key does not work, please press, and hold the Reset button until all
the lights on the front of the hotspot blink off and back on again, then try the Wi-Fi Key again. (The
Reset button is located next to where you placed your sim card into the hotspot).
3) Now that your device is connected to the ZTE MF920U it should automatically open the ZTE
Admin Page and ask you to login. If it does not load this page automatically, please open your
browser on your phone/tablet/laptop etc and type: 192.168.0.1 and press enter/go.
4) Once the ZTE landing page has loaded, it will ask you for a password.
5) This is printed on the sticker on the back of the ZTE hotspot. (Not to be confused with the Wi-Fi
Key)
To Next Page
Loading...
