55
Connecting to Your Device
Using Wi-Fi
1. Power on your device.
2. Ensure that your computer or other client devices
have enabled Wi-Fi, and search for available
wireless networks.
NOTE:
Refer to your Wi-Fi-enabled client device manual
for further details on how to search for wireless
networks. If you use a computer, you need
to set your computer to obtain an IP address
automatically.
3. Select the Wi-Fi name (SSID) of your device, and
click
Connect
.
4. Enter the Wi-Fi password if necessary, and click
OK
.
NOTE:
Refer to the chapter
Getting to Know the Wi-Fi
SSID and Password
to get the default Wi-Fi SSID
and password.
5. Wait until the client device is connected to your
device successfully.
To Next Page
Loading...
Need help?
General
