24
5. If desired, change the Admin Login (maximum 32 characters).
6. Click Apply.
Note: If you forget the Admin login, you need to perform a hardware reset.
Change Wi-Fi security types
You can set the mobile hotspot’s Wi-Fi security types in the AT&T Wi-Fi Manager home
page.
1. Log in as Administrator.
2. Click Settings in the left-side menu.
3. Click Wi-Fi > Basic tab.
4. Select the desired security types for the Main Wi-Fi and the Guest Wi-Fi networks. It
is recommended that you use WPA(AES)-PSK whenever possible.
Security Type (the most common mode) :
• WPA2(AES)-PSK — Recommended. Other users can access your mobile hotspot
only if they enter the correct password.
• WPA-PSK/WPA2-PSK--Other users can access your mobile hotspot only if they enter
the correct password.
• OPEN--Not recommended. Anyone can access your Wi-Fi network without a
password and you are responsible for charges incurred.
To Next Page
Loading...
