Zte R218 - Configuring Your PC for Wi-Fi; PC Network Protocol Configuration

10
3. Click to return to the home page,
and then click or .
NOTE:
• To change current connection setting, please disconnect
from network.
• To modify the parameters of your device, log in to the 4G
Mobile Hotspot configuration page.
Configuring Your PC
The following procedure describes how to configure the Internet
Protocol in Windows 7 for your Wi-Fi connection.
1. Right-click Network and select Properties.
2. Select Change adapter settings.
3. Right-click Wireless Network Connection and select
Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4), and click
Properties.
5. Select Obtain an IP address automatically and Obtain
DNS server address automatically, and click OK.