9
1 LAN ports Connect to a PC.
2
WAN/LAN
ports
WAN/LAN4: Connect to a WAN in the single WAN
mode.
WAN/LAN3: If you want to use two WAN
connections, you need to switch to the Multi WAN
mode on the management web page and then
connect the other WAN to the WAN/LAN3 port.
3 Power port Connect to the original power adapter.
4 WPS key
Press and hold for about 2 seconds to activate
the WPS function or create the mesh network.
5 NFC area
When you bring your NFC-enabled phone and the
device together, follow the instructions on your
phone to connect to the Wi-Fi network without
entering the password.
To Next Page
Loading...
