Zte VS2801SG - Administration Settings

1GE Dual Mode ONU User Manual
Figure 3-32: Port Forwarding
Parameter
Illustration
Enable
Enable or disable port forwarding rule.
Name
Name of the port forwarding rule.
Protocol
Protocol of the port forwarding rule, including TCP and UDP.
WAN Host Start/End IP
Address
Specify WAN host IP range for the port forwarding rule. Only in
the range, the host of WAN side can work with the rule.
WAN Connection
Select WAN connection.
WAN Start/End Port
TCP or UDP port range of WAN side host.
LAN Host IP Address
Specify host IP address of LAN side.
LAN Host Start/End
Port
TCP or UDP port range of LAN side host.
3.6 Administration
3.6.1 User Management
This page allows user to change password of current login username.
Page 26