Zte VS2801SG - Lan

1GE Dual Mode ONU User Manual
PPP
Username
PPPoE account.
Password
PPPoE password.
DMS name
Server name.
Authentication
Type
PPPoE authentication type, including Auto, PAP and CHAP.
Connection
Trigger
The trigger of PPPoE connection after disconnected.
Always On: once PPPoE disconnected, ONU will connect again
automatically.
On Demand: ONU will connect again if there is data traffic.
Manual: ONU will connect again after submitted the configurations.
IP Version
IPv4/IPv6
Enable NAT
Checked indicates NAT function is enabled. Unchecked indicates
NAT function is disabled.
Only IPv4 has this option.
IP Type/PPP TransType
Method of WAN connection Obtains IP address. If link type is PPP,
PPP TransType will be PPPOE; if link type is IP, IP Type will be
static or DHCP.
IPv6
IPv6 Info Get
Mode
Method of WAN connection obtains IPv6 address, including
Manual Mode and Auto Mode.
GUA From
Method of WAN connection obtains Global Unique IPv6 Address.
DNSv6 From
Method of WAN connection obtains DNSv6.
Prefix
Delegation From
Method of prefix delegation.
3.3.2 LAN
This page supports the management of the ONU's IP address, dynamic address
management, including dynamic address distribution and relevant parameters distribution,
such as lease time, address range, DHCP Proxy, etc.
3.3.2.1 DHCP Server
This page contains LAN IPv4 address and LAN DHCP server configurations.
Page 11