Zte WP623 - Dialing a Number in the List; Hand-Free; Redialing

19
3.1.3 Dialing a Number in the List
All calls you recently dialed, received or missed are saved in your
phone. All numbers are grouped as Missed Calls, Incoming Calls and
Outgoing Calls. When the list is full, the oldest numbers will be
overwritten automatically when new record is coming.
You can check the list as follows:
 In standby mode, press CALL/REDIAL key to enter all recent
calls.
 Or press MENU/SELECT key→ Phone Menus→ Calls to
view All Calls, Missed Calls, Received Calls or Dialled
Calls.
 Press Up/Down key and MENU/SELECT key to select
record listed and confirm options.
 All the numbers listed can be directly dialed by
CALL/REDIAL key. Or press MENU/SELECT key to select
Options to Send Message to the number, view the number’s
information in Detail, or Save the number in Names, or Add
to Blacklist.
3.1.4 Hand-free
z Hand-free
ZTE WP623 supports hand-free function. Press HANDFREE
key to activate. The dial tone make user easy to recognize
whether phone is in status of hand-free or not.
z Receiver and Hand-free Conversion
ZTE WP623 supports hand-free converts to receiver speaking
(hand-free speaking is off while receiver is picked up). ZTE
WP623 also supports receiver to hand-free speaking (to convert
to hand-free speaking while picking up receiver, press
HANDFREE key and hook-on receiver afterwards).
3.1.5 Redialing
ZTE WP623 supports saving dialed phone numbers. When pick up
receiver or press HANDFREE key, press CALL/REDIAL key to display
dialed numbers on the screen, use Up/Down key to select one dialed
phone number, and then press CALL/REDIAL key to dial this number
directly.
Note: When abnormal power down causes abnormal phone restart, the