Zte WP623 - 6.8 Factory Settings

31
Bar.
2. Set types of bar, press MENU/SELECT key.
 International Calls: Bar international call(s).
 All Except Home: Bar all calls except for home number.
 Incoming Calls: Bar incoming call(s).
 Incoming If Abroad: Bar incoming call(s) overseas.
 Outgoing Calls: Bar sending call(s).
 Cancel All: Cancel barring call(s) setting.
3. Select any of above mentioned bars (except for Cancel All), and
then scroll to set barring options:
- All Services: Bar all services, such as incoming call, voice call,
and message, etc.
- Voice Calls: Bar voice call only.
- Data: Bar data only.
- Fax: Bar fax only.
- Messages: Bar message only.
- All except Msgs: Bar all services except for message.
4. After setting bar and service type, you can do as follows:
 On：Activate bar after registration.
 Off: Cancel setting of bar.
 Status: Check whether bar is activated or not.
 Cancel All: Cancel barring call(s) setting.
Note: Set or cancel network call bar acquires network code offered by
the service provider. Three consecutive inputting wrong codes can
cause locking of barring service. To unlock, please contact with network
provider.
6.8 Factory Settings
Your phone offers factory default phone setting. You may modify some
options when you use phone. You can also Phone Reset some modified
options to the origin.