28 29
To respond to an incoming call while you’re on a call:
• Select (Hold current and answer) to answer the call. This puts the
rst caller on hold and answers the second call.
• Select
(End current and answer) and then press the Center Key to
answer the second call and end the rst one.
• Press the Right Soft Key to reject the second call.
• Select
> Message reject to reject the second call and send a preset text message
to the caller.
To switch between two calls:
Select
> Swap.
Setting Up a Conference Call
With this feature, you can talk to two people at the same time.
1. Place the rst call.
2. Once you have established the connection, select
> Add call
and dial the second
number. This puts the rst caller on hold.
3. When you’re connected to the second party, select
> Merge calls.
If one of the people you called hangs up during your call, you and the remaining
caller stay connected. If you initiated the call and are the rst to hang up, all callers
are disconnected.
To end the conference call, press the Power/End Key.
Adjusting Your Call Settings
Setting Contact Display Options
You can set the order of the contacts displayed in the Contacts app.
1. From the home screen, select > Contacts >
> Settings.
2. Select Sort list by or View contact names to set the order of the contacts and the
format of the contact names.
Editing Quick Response to Rejected Callers
1. From the home screen, select > Settings > Device > Call settings >
Quick responses.
2. Select a text message and press the Center Key to edit it.
3. Press the Center Key to save the message.
Setting Voicemail
1. From the home screen, select > Settings > Device > Call settings >
Carrier Setting > Voicemail.
2. Select from the following voicemail settings:
• Service: Select the voicemail service provider. Your carrier is the default.
• Setup: View the voicemail number.
• Sound: Set the notication sound for new voicemails.
• Vibrate: Check to enable vibration for notication.
Setting the Phone Flip Action
You can answer or end/reject a call by simply opening or closing the ip phone.
1. From the home screen, select > Settings > Device > Call settings.
2. Select Open to answer or Close to end call.
3. Press the Center Key to check/uncheck the feature.
Setting TTY Mode
Your phone is a TTY compatible device. A TTY device can allow people who have hearing
or speech disabilities to communicate by telephone. Simply connect the TTY device to
the phone’s headset jack.
Select a TTY mode for your phone to work with a TTY device, or turn TTY o.
1. From the home screen, select > Settings > Device > Call settings > TTY mode.
Phone CallsPhone Calls