Zte Z3351S - Page 55

55
Set Plus Code Dialing
Plus Code Dialing allows the phone to automatically dial the
international access code for your location when you touch and hold
the 0 key in the dialpad.
To activate Plus Code Dialing:
1. Touch > > (in the top search field) > Settings > Call
settings > Additional settings > Plus code dialing setting.
2. Switch on Setup Plus Code Replacement to enable this feature.
To change the international dialing code:
1. Touch > > (in the top search field) > Settings > Call
settings > Additional settings > Plus code dialing setting.
2. Touch Replace Code of Plus Code.
3. Enter a new code and touch OK.
Set Call Blocking
You can add numbers to a blacklist to filter out calls and messages
from these numbers.
1. Touch > > (in the top search field) > Settings >
Blocked numbers.
2. Touch ADD A NUMBER.
3. Enter the phone number or touch > > Contacts and
select a number from the contact list.
4. Touch BLOCK.