Table 4-1 Descriptions of Indicators
LED Indicator Status Description
Off The device is powered off.
Solid green The device is powered on properly.
Power
Solid red
The device is performing self-detection or the
self-detection fails.
Off The DSL connection has not been established.
Solid green
DSL synchronization is normal and the link Con-
nection is normal.
Flashing slowly
green
Physical link exists, however carrier wave has
not been detected.
Broadband
(DSL)
Flashing fast
green
The device is in the handshaking process to es-
tablish the link connection.
Off
The equipment is not powered on or the WAN
port is disabled.
Broadband
(WAN)
Solid green The Ethernet connection has been established.
Off The gateway is switched off.
Solid green
The WAN connection is online. The device has
a WAN IP address from IPCP, DHCP or statically
configured. LED remains green in the case of
disconnection due to idle timeout when PPP
dial-on-demand is enabled. Green LED indicates
that the routing connection state is up.
Internet
Solid red
The WAN connection is dialing up or fails to
get online. Device attempted to become IP con-
nected and failed (no DHCP response, no PPPoE
response, PPP authentication failed, no IP ad-
dress from IPCP, etc).
To Next Page
Loading...
