ZXHN H168N User’s Manual
18
No. Problem and Troubleshooting
3
How to properly install telephone extensions or other
devices on the VDSL2 line?
It is recommended to connect the VDSL2 splitter to the
telephone cable first and then connect the phone sets to
the splitter interfaces. Installing a telephone directly
before the splitter will lead to connection failure between
the ZXHN H168N and the device at central office side,
or an Internet access failure, or a slow connection speed.
Connecting other electronic devices between the user end
and splitter may affect the VDSL2 communications
(since VDSL2 has a higher requirement for the line
quality) and furthermore affect the normal operation of
VDSL2. If the phone sets are required to be connected
before the splitter, you should serially connect the
MicroFilter before the phone sets (Generally, to minimize
interference, only one MicroFilter can be connected
before the splitter).
4
Sometimes, the VDSL2 users cannot access to the
Internet normally
To Next Page
Loading...
