Zte ZXHN H267N - Configure the DDNS

Chapter3ConguretheInternet
ParameterDescription
ServiceTypeTheservicetypeoftheapplication,includingTCP,UDP,
andTCPANDUDP.
ThedefaultservicetypeisTCP.
TriggerPortTheportthattheapplicationuses.
ConnectTypeTheconnectiontypethatisusedtoconnecttheoutside,
includingTCP,UDP,andTCPANDUDP.
ThedefaultservicetypeisTCP.
WANPortRangeSpecifytheportrangeofthedeviceprotocolthatthe
triggeringportmaps,thatis,thelayer-4portnumberof
thepackets.
Oncethedeviceaccessesthetriggeringport,theservice
betweenthestartportandendportwillbeenabled.
TheWANStartPortandWANEndPortmustbespecied
andmeetthefollowingconditions.
lTheendportnumberislargerthanthestartport
number.
lThedifferencebetweentheendportnumberandthe
startportnumberislessthannine.
TimeoutThetimewhennotrafcoccurs.
3.ClickApplybuttontoapplythechanges.
–EndofSteps–
3.5ConguretheDDNS
ThesectiondescribeshowtocongureDDNS.DDNSprovidestheparametersofDDNS
congurationfunction.
Steps
1.OnthemainpageoftheZXHNH267N,selectInternet>DDNStogototheDDNS
page,thepageasshowninFigure3-27.
3-33
SJ-20140702105807-002|2014-11-13(R1.0)ZTEProprietaryandCondential