Zte ZXHN H267N - Configure the Route; Configure the Route(Ipv4); Figure 4-17 Routing Table(Ipv4) Page

Chapter4ConguretheLocalNetwork
12.ClickApplybuttontoapplythechanges.
–EndofSteps–
4.4ConguretheRoute
4.4.1ConfiguretheRoute(IPv4)
Thesectiondescribeshowtocongureroute(IPv4).Route(IPv4)providestheparameters
ofroute(IPv4)congurationfeatures.
TherelevantinformationofInternetstatusincludesRoutingTable,StaticRoutingand
PolicyRouting.
Prerequisite
BeforeconguringRoute(IPv4),makesurethattheIPv4WANconnectioniscreated.
Steps
1.OnthemainpageoftheZXHNH267N,selectLocalNetwork>Route>IPv4togo
totheRoute(IPv4)page.
Routingtable
2.ClickRoutingTable.
ThepageisshowninFigure4-17.
Figure4-17RoutingTable(IPv4)Page
3.ClickRefreshtorefreshtheinformations.
Staticrouting
4.ClickStaticRouting.
ThepageisshowninFigure4-18.
4-15
SJ-20140702105807-002|2014-11-13(R1.0)ZTEProprietaryandCondential