Zte ZXHN H268A

Page 4 of 8

User Guide

ACN Premium Wi-Fi Modem

MKTG-242 - Home Gateway ZXHN H268A Premium Wi-Fi Modem FTTN/B - 13.11.2018

Option

2

Connect via Ethernet cable to your nbn™ Broadband Service

1. Connect one end of the yellow Ethernet cable provided to one of the yellow ports marked LAN1, LAN2, LAN3, LAN4.

2. Connect the other end of the Ethernet cable to the Ethernet/LAN port on your device

Ethernet cable

Device e.g. laptop/PC

Once you have completed your connection (via Wi-Fi or Direct cable) please conrm that the service is working correctly

by opening up your web browser application (e.g. Internet Explorer, Google Chrome, Firefox or Safari) and heading to your

favourite website.

Setting up your new ACN nbn™ Bundle Phone service

Now that you have conrmed your nbn™ Broadband service is working, you can start setting up your new bundled phone

service.

Take the 2nd telephone cable provided and plug one end into the green port marked “Phone 1” on the back of the

modem. Please note that the “Phone 2” port is disabled and will not work.

Conrm that your phone service is working correctly by making a call from your phone. If you are unable to hear a dial-

tone or cannot successfully make a phone call, please refer to the Troubleshooting section of this guide:

You should see the following lights solid or ashing green on your modem:

Step

1

Step

2

Phone cable

Zte ZXHN H268A - Page 4