ZXHN H268A User Manual
6 Confidential and Proprietary Information of ZTE CORPORATION
LED Indicator Status Description
RF switch is off.
WPS
Solid Green
WPS access is successful. This solid-on light
will be automatically off after 5 minutes.
Fast Flashing Green
The WPS accessing of the WLAN terminal is
Faulty.
Slowly Flashing
Green
WLAN terminal is in WPS accessing process.
Off
No WPS access or the WPS access of the
terminal exceeds 5 minutes
Phone
Solid Green
ZXHN H268A has registered on the VoIP
network.
Flashing Green
Indicates when the associated telephone is
off-hook.
Off
ZXHN H268A is not powered on or ZXHN
H268Ahas not been registered on the VoIP
network.
USB
Solid Green
The USB interface is connected and operating
in host mode, but no data is being transmitted.
Flashing Green Data is being transmitted on the interface.
Off
ZXHN H268A is not powered on or the USB
interface is not connected.
Rear panel
Figure 2 shows the buttons on the side panel of the ZXHN H268A.
Figure 2 The Side Panel
Table 2 describes the buttons on the side panel of the ZXHN H268A.
Table 2 The Side Panel
Button Function
USB
USB2.0 host port in right panel: Used for the USB storage device,
printer or 3G/LTE Dongle connection.
On/Off Power switch. Power on or power off the device.
Figure 3 shows the interfaces and buttons on the back panel of the ZXHN
H268A.
To Next Page
Loading...
