Zte ZXMW NR8120A - 3.2.1 Checking CFM

Chapter3FaultLocatingMethods
3.2.1CheckingCFM
ThisproceduredescribeshowtochecktheConnectivityFaultManagement(CFM)
function.
CFMreportsalarmsandlocatesfaultsforlayer-2links.
Prerequisite
UsershaveloggedintotheNR8000SeriesWEBLMTsystem,andperformedglobaland
MaintenanceDomain(MD)conguration,MaintenanceAssociation(MA)conguration,
andMaintenancePoint(MP)congurationrelatedtoCFM.
Steps
1.Intheleftnavigationtree,selectETH>OAM_CFM>PerformanceTest.The
PerformanceTestpaneisdisplayedontheright.
2.Settheparameters,andclicktheApplybutton.Theperformancetestfunctionis
enabled,seeFigure3-4.
Figure3-4PerformanceTestPane
Foradescriptionoftheparameters,refertothefollowingtable.
ParameterDescription
MDNameSelectanMDnamefromtheconguredMDlist.
MANameSelectanMAnamefromtheconguredMAlist.
LMEPIDSetsthelocalMEPIDconguredfortheport.
OperationTypeSetsthetestingfunctiontype,includingSingle-endedLM,One-way
DM,Two-wayDM,TestTransmission,andTestReception.
3-5
SJ-20150804150350-006|2015-09-17(R1.0)ZTEProprietaryandCondential