Need help?Do you have a question about the Zünd PN Series and is the answer not in the manual?
General| Series | PN Series |
|---|---|
| Software | Zünd Cut Center |
| Accuracy | ± 0.1 mm |
| Material Thickness | Up to 50 mm |
| Material Handling | Automatic material handling system available |
| Cutting Width | Up to 3200 mm |
| Power Requirements | Varies depending on configuration, typically 3-phase power |
This manual provides instructions for operating the Zünd PN Series cutters.
Explains how to navigate and understand the structure of the operating manual.
Provides guidance on text references, sketches, and dimensional information.
Offers advice for resolving issues and improving cutter usage.
Illustrates and labels the main components of the cutter system.
Details the construction and operational principles of the cutter's parts.
Specifies the authorized applications and limitations of the cutter system.
Emphasizes the importance of safety and outlines manual contents.
Explains hazard symbols, signal words, and their meanings.
Covers regulations, procedures, and precautions for safe operation.
Identifies and illustrates hazardous zones on the cutter during operation.
Describes safety features like light barriers and emergency stop switches.
Lists required protective gear for operators and service personnel.
Warns about risks associated with the machine's electrical components.
Gives instructions and guidelines for proper disposal of the cutter system.
Describes the LCD display, keypad functions, and navigation.
Details the structure and usage of the cutter's command menu system.
Provides detailed explanations of various commands for system configuration.
Covers procedures for switching on/off, setup, and pre-processing checks.
Guides users on what information to gather before contacting service.
Lists common error codes, causes, and recommended actions.
Describes troubleshooting steps for issues related to the main distribution box.
Outlines general safety instructions and procedures for maintenance work.
Provides a schedule and breakdown of maintenance tasks by frequency and responsibility.
Details specific maintenance tasks like visual inspection and cleaning.
Covers requirements and procedures for setting up and starting the machine.
Introduces the chapter dedicated to the various tools used with the cutter.
Provides fields for recording service contact information and machine details.
Offers a log for recording service, maintenance, and repair activities.
To Next Page
