Need help?Do you have a question about the Zünd M-2500 and is the answer not in the manual?
General| Modular Tooling | Yes |
|---|---|
| Cutting Speed | Up to 100 m/min |
| Tool Changing | Automatic |
| Operating Frequency | 50/60 Hz |
| Material Handling | Automatic |
| Operating Voltage | 400 V |
Diagram and listing of the main components of the cutter system.
Explanation of modules and tools, including types like UM, POT, EOT, DRT, RM-A, PUM, MAM-S/D.
Description of options like laser pointer, ICC camera, static work surface, conveyor, and sheet feeder.
Details about the G3 cutter as a variable processing system and schedule of work sequences.
Specifications including dimensions, weights, material clearance, electrical connection, and environmental conditions.
Explanation of hazard symbols (Danger, Warning, Attention) and their meanings.
Description of protective systems, emergency stop switches, and the operating unit.
Details on hazards from gathering/retraction, impacts of foreign objects, cuts, stab wounds, and burns.
Warning about the risk of death or injury from electric shock and safety instructions.
Safety instructions for handling, storing, and disposing of chemicals used with the machine.
Information on risks associated with flammable materials and dust explosions, including fire classes.
Essential instructions for operators, emphasizing training, hazard awareness, and seeking information.
Overview of the control panel, including the switch unit, emergency stop switches, and operating unit.
Procedures for daily checks prior to start-up, switching on, initialising, and operating status.
Instructions for handling modules and tools, including insertion, selection, and tool management.
A comprehensive list of error codes, their descriptions, causes, and solutions.
To Next Page
