Light indicator turns red - the mount is in Equatorial mode.
Light indicator turns green - the mount is in Altazimuth mode.
If you forget the hand controller’s WiFi password, you can press and hold the Tracking and Cancel
buttons together until the mount boots up and keep pressing for 5 seconds after it. Loosen them
when the high-speed indicator light flashes. The WiFi password will then be restored to the
default setting: 12345678
3.3 Mounting the equatorial mount
3.3.1 Mount installation
*Tripod model: ZWO carbon fiber TC40
Unfold the tripod
S
ecure the Installation Disk:
Use a hexagonal wrench to attach 3 x M6 screws to fix the mounting plate on the main body of
the AM3.
To Next Page
Loading...