3
.3.5 Counterweight (optional) installation
How to choose whether to install a Counterweight?
If the combined weight of the telescope is less than 8KG, the equatorial mount is not required to
have a counterweight installed. If the combined weight of the telescope reaches 8KG or more, it
needs to be installed with a counterweight. The total weight of the telescope should not exceed
13KG. In order to ensure the stability of the equipment, it is recommended to use a counterweight
when the total weight of the telescope reaches 8KG, and the interface thread of the counterweight
C
ounterweight installation steps
1. Find the mounting screw hole for the counterweight at the bottom of the AM3 mount body.
The screw hole will have a silver color plug in.
2. Turn the plug counterclockwise until fully unscrewed.
3. Install the counterweight bar and tighten clockwise, then install the weight.
To Next Page
Loading...