4. Setup the settings of ASCOM focuser.
5.Choose ZWO Focuser
Additional Installation Information
There is significant torque from the EAF stepper motor. We
recommended setting the 0 position and the maximum number of
steps as a first step to prevent possible damage to the focuser.
For the standard bracket installation:
The 0 position is recommended to be set to the position when the
focuser is fully retracted.
The maximum number of steps is recommended to be set to a limit
position less than or equal to the full focuser stroke.
For the curved saddle installation:
The 0 position is recommended to be set near the focus of the
focus of the focus holder.
To Next Page
Loading...
