5. M4 and M5 Wrenches for secure the shaft locking screws and
bracket hex screws.
6. USB 2.0 Cable – connection of computers or ASIAIR to the
focus controller.
EAF Specifications
The ZWO EAF utilises a USB2.0 interface for data communication
which supports ASCOM and can be used in association with a wide
variety of astronomy software.
Planetary imagers can use ZWO’s ASICAP or other third party
software packages such as Sharpcap, FireCapture.
Deep sky astrophotographers can enjoy support from ZWO’s
ASIAIR or other well known packages such as Maxim DL, The
SkyX, Sequence Generator Pro, Nebulosity and many more. Third
party focus software such as FocusMax, is also supported.
Your EAF is also fitted with a small multi-function interface that
supports a temperature sensor or external hand controller.
A dedicated temperature sensor can be connected to collect
temperature data and allow focuser control from your chosen
To Next Page
Loading...
