Zycoo X10 User Manual

Identifies the intended users for this operating manual.

Tracks document updates, applicable firmware versions, content changes, and dates.

Describes the X10 SIP paging gateway as a multifunctional IP audio device for industry users.

Details the technical specifications of the X10 SIP Paging Gateway, including outputs, inputs, and power.

Explains how to access the device's web management interface using its IP address and default credentials.

Details how to view basic device information, including SIP status, device, and network details.

Configures primary and secondary SIP accounts, including server, port, user ID, and authentication.

Configures Peer-to-Peer settings for direct system calls without a central server.

Specifies supported audio codecs: G.722, G.711(Ulaw), G.711(Alaw), and Opus.

Allows configuration of advanced SIP protocol parameters for the device.

Configures speaker and microphone volume, including automatic gain control (AGC) settings.

Configures input/output settings, including trigger, relay, and general event configurations.

Configures the API interface for device linkage, call, and relay control via URL callbacks.

Configures multicast settings for up to 9 levels, allowing priority stream interruption.

Configures audio collection from external sources for playback via paging endpoints.

Sets the language for local voice prompts, such as IP address announcements.

Allows users to upload audio files (up to 5MB) for ringtones or Play API audio files.

Configures ONVIF settings for interoperability with IP-based physical security products.

Configures network settings, allowing DHCP or static IP assignment for the device.

Configures time settings using NTP server for accurate timekeeping and allows setting the time zone.

Provides instructions for resetting the device's password via the Settings --> Password Settings page.

Details the process for upgrading the device's firmware, including current version and update time.

Explains how to reboot and reset the device, including restoring factory defaults and scheduling reboots.

Uses Ping utility to test network connectivity and trace network routes to other devices.

Imports and exports device configuration files in YAML or JSON format for backup and recovery.

Supports DHCP Option 066 and static TFTP/HTTP for automatic device configuration.

Tests speaker, microphone, and relay functionality before registering the device to the server.