X10 SIP Paging Gateway User Guide
7.3 Import/Export
This page is used to import and export the current configuration of the device, and you may
use this configuration file to backup and/or recover. Both YAML and JSON formats are
supported.
Please go to Maintenance --> Import/Export page to backup or recover.
Import/Export
7.4 Auto Provisioning
The system is supporting DHCP Option 066 and static TFTP/HTTP two auto provisioning
methods.
When the system starts by default and the network mode is in DHCP, it will try to grab
option 066 from the DHCP data as the TFTP server address. If the system couldn't get the
option information, it will use the below Static Provisioning Server data to obtain the
configuration file. When the system starts, and the network mode is in Static, it will use the
below Static Provisioning Server data to directly obtain the configuration file.
The configuration file name's format rules:
1) all letters in the server MAC address need to be uppercase.
2) all colons ":" need to be removed. For example, 68692E290012.
Please go to Maintenance --> Auto Provisioning page to configure static server.
To Next Page
