X10 SIP Paging Gateway User Guide
7. Maintenance
7.1 Diagnostic
Ping is a network administration utility or tool used to test connectivity on an IP network.
Input other devices' IP addresses and click on the submit button to trace the network route.
Please go to Maintenance --> Diagnostic page to execute ping command.
Ping
7.2 Ethernet Capture
The purpose of the Ethernet capture tool is to capture Ethernet network packets and store
them in a standard Wireshark-compatible packet capture ‘.pacp’ file for immediate viewing
and data analysis.
Please go to Maintenance --> Ethernet Capture page to operate.
Ethernet Capture
To Next Page
