AMG1202-T10B/AMG1302-T10B
Support Notes
6
All contents copyright © 2013 ZyXEL Communications Corporation.
Foreward
This support note content covers the AMG1202-T10B/AMG1302-T10B In the
following example, the print screen of diagrams are AMG1202-T10B
FAQ
System FAQ
1. How do I access the AMG1202-T10B/AMG1302-T10B Command Line
Interface (CLI)?
The Command Line Interface is for the Administrator use only, and it could be
accessed via telnet session.
Note: It is protected by super password, ‘1234’ by factory default.
2. How do I update the firmware and configuration file?
You can do this via accessing web GUI of AMG1202-T10B/AMG1302-T10B as
Administrator. Firmware update function is under Maintanance -> Firmware
Upgrade. Configuration update function is under Maintanance ->
Backup/Restore.
3. What should I do if I forget the system password?
In case you forget the system password, you can erase the current
configuration and restore factory defaults this way:
To Next Page
Loading...
