Need help?Do you have a question about the ZyXEL Communications ARMOR G5 and is the answer not in the manual?
General| Maximum data transfer rate | 6000 Mbit/s |
|---|---|
| Flash memory | 4000 MB |
| Certification | Safety: CE-LVD, BSMI EMC: CE, FCC, BSMI, EAC |
| Internal memory | 1000 MB |
| Processor cores | 4 |
| Built-in processor | Yes |
| Processor frequency | 2.2 MHz |
| DSL WAN | No |
| WAN connection type | RJ-45 |
| 3G/4G USB modem compatibility | - |
| Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax) |
| Top Wi-Fi standard | Wi-Fi 6 (802.11ax) |
| WLAN data transfer rate (first band) | 1200 Mbit/s |
| WLAN data transfer rate (second band) | 4800 Mbit/s |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11ax, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100, 1000, 2500, 10000 Mbit/s |
| Ethernet LAN interface type | 10 Gigabit Ethernet |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-C ports quantity | 1 |
| Security algorithms | IPSec, WPA3-PSK, WPS |
| Product type | Tabletop router |
| Product color | Black |
| Antennas quantity | 13 |
| Output current | 2.1 A |
| Output voltage | 19 V |
| Power source type | AC |
| Storage temperature (T-T) | -30 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Mobile operating systems supported | Android 10, Android 5.0, Android 5.1, Android 6.0, Android 7.0, Android 7.1, Android 7.1.2, Android 8.0, Android 9.0, iOS 10.0, iOS 11.0, iOS 11.4, iOS 12, iOS 13, iOS 9.0, iOS 9.1, iOS 9.2, iOS 9.3 |
| Package depth | 235 mm |
| Package width | 375 mm |
| Package height | 75 mm |
| Package weight | 1800 g |
| Number of products included | 1 pc(s) |
| Cables included | LAN (RJ-45) |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 182 mm |
|---|---|
| Width | 248 mm |
| Height | 66 mm |
| Weight | 1000 g |
Introduces the ARMOR G5 router's features, ports, and wireless capabilities.
Explains methods for managing the device, such as Web Configurator and Zyxel ARMOR app.
Details how to reset the device to factory defaults using the reset button.
Explains the status indicators (LEDs) on the front panel of the NBG7815.
Outlines the setup process and basic configuration tasks covered in the wizard.
Guides users on how to launch the initial setup wizard via a web browser.
Describes the Web Configurator as an HTML-based management interface for system setup.
Provides steps to access the device's web-based configuration interface.
Explains the function of the navigation panel for configuring device features.
Explains the Standard Mode and Bridge Mode for the NBG7815.
Guides users on how to access and view the status screen in Standard Mode.
Provides instructions on how to configure the device for Bridge Mode operation.
Guides users on how to access and view the status screen in Bridge Mode.
Guides users on how to perform a speed test for the NBG7815's internet connection.
Explains how to set up independent wireless networks with different privileges.
Details how to enable or disable guest WiFi networks for client access.
Explains how to switch between Standard and Bridge operating modes.
Guides on setting up port forwarding rules for incoming service requests.
Explains how to block URLs and define time periods for parental control.
Details setting up OpenVPN for secure virtual private networks.
Covers file sharing and media server setup using USB devices.
Explains encapsulation methods, IP addresses, and DNS settings.
Guides on enabling NAT and configuring port forwarding rules.
Explains how to enable Universal Plug and Play for network device connectivity.
Details configuring SSID, security, and basic settings for the default wireless LAN.
Guides on setting up and configuring guest wireless network settings.
Explains allowing or excluding devices based on MAC address for network access.
Covers enabling/disabling WPS for quick and secure wireless network setup.
Guides on changing the NBG7815's IP address in Standard Mode.
Explains configuring static DHCP entries for specific devices.
Guides on configuring IPv6 addresses for the NBG7815 on the LAN.
Details enabling or disabling the NBG7815's IPv4 firewall rules.
Guides on enabling and creating IPv6 firewall rules to filter IPv6 traffic.
Guides on viewing basic information and status of the NBG7815.
Details setting management session timeout and changing passwords.
Explains configuring remote management settings via HTTPS or Wake on LAN.
Covers firmware upgrades, system restarts, and factory resets.
Guides on selecting between Standard (Router) and Bridge modes.
Provides solutions for issues related to accessing and logging into the NBG7815.
Offers troubleshooting steps for problems with internet connectivity.
Details the process and implications of resetting the device to factory defaults.
Provides solutions for issues when accessing or using USB devices.
Lists essential details to have ready when contacting customer support.
Provides step-by-step instructions for setting up IP addresses on Windows 7.
Details IP configuration for Ubuntu 8 Linux using the GNOME environment.
Lists common network services, their protocols, port numbers, and descriptions.
Provides crucial safety instructions for product installation and use.
To Next Page