ZyXEL Communications ARMOR G5 - Page 38

Chapter 5 Standard Mode
NBG7815 User’s Guide
38
Figure 15 Settings > System > Status (Standard Mode)
The following table describes the labels shown in the Status screen.
Table 5 Settings > System > Status (Standard Mode)
LABEL DESCRIPTION
System
Model Name This is the model name of your device.
Firmware Version This is the firmware version.
System Operation Mode This is the device mode to which the NBG7815 is set, see Section 13.7 on page 140 for
more information.
Enable IPv4 Firewall This shows if the IPv4 firewall is enabled on the NBG7815.
Enable IPv6 Simple
Security
This shows if the IPv6 firewall is enabled on the NBG7815.
System Uptime This is the total time the NBG7815 has been on.
WAN Information
MAC Address This shows the WAN Ethernet adapter MAC Address of your device.