NetAtlas Enterprise Quick Start Guide
2
1 Introduction
The NetAtlas Enterprise Ethernet Switch Manager is an Element
Management System (EMS) that retrieves management information
from switches using the SNMP protocol. The EMS allows you to
manage multiple switches from a central location.
This guide shows you how to install the EMS. Refer to the user’s guide
for background and configuration information. The NetAtlas Enterprise
Ethernet Switch Manager will be referred to as the EMS in this guide.
2 System Requirements
These are the system requirements for the Windows version of the
EMS.
• CPU: Intel Pentium 4, 1.6 GHz or above
• Memory (RAM): 1 GB or more
• Hard Disk free space: 20 GB or more
• Screen Resolution: 1024x768 pixels
• Ethernet Adaptor: 10/100 Mbps
• Operating System: Windows 2000 (with service pack 1), Windows XP
or Windows Server 2003 and all using NTFS file system.
• Database Program: PostgreSQL 8.0 later versions.
• Castle Rock’s SNMPc 6.
2.1 EMS Installation Overview
The following gives an overview of what you need to do to install the
EMS:
1 Install SNMPc. See the documentation that comes with your SNMPc
for information.
2 Install the EMS. The PostgreSQL database will be installed during
the EMS installation.
Note: The installation program will bypass the PostgreSQL
installation if it is already installed.
EMS_Switch_V1-02.fm Page 2 Wednesday, January 4, 2006 1:48 PM
To Next Page
Loading...
