NetAtlas Enterprise Quick Start Guide
5
4 SNMPc Network Manager Startup
Start the SNMPc Network Manager
manually (from the Windows Start
menu) or have it start automatically
each time you turn on your computer.
To start SNMPc automatically each
time you turn on your computer, click
Config, System Startup, select
Auto Startup and then click OK.
Conversely, clear this check box if you do not wish SNMPc to
automatically start each time you turn on your computer.
5 Adding MIBs
The Management Information Base (MIB) is designed for holding
management information on systems (such as the switch that the
standard MIB does not include).
1 From the SNMPc Network Manager main screen, click Config, MIB
Database.
2 In the Compile Mibs screen that
displays, scroll down to the bottom of the
Mibs to Compile list box and click Add.
Note: If you have uninstalled an earlier
version of the EMS, you must
remove zyxel.mib first.
3 Select the following MIBs in the Add
Mibs list box:
• rfc2674.mib
• rfc2925.mib
• rfc3291.mib
• rfc3621.mib
• OSPF-MIB.mib
• zyxel-es3124.mib
• zyxel-es3124pwr.mib.
EMS_Switch_V1-02.fm Page 5 Wednesday, January 4, 2006 1:48 PM
To Next Page
Loading...
