Chapter 35 Firmware Upgrade
EMG6726/8726-B10A User’s Guide
265
Figure 176 Firmware Uploading
The EMG automatically restarts in this time causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
Figure 177 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
Choose File Click this to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload Click this to begin the upload process. This process may take up to two minutes.
Table 127 Maintenance > Firmware Upgrade
LABEL DESCRIPTION
To Next Page
Loading...
