Chapter 6 Broadband
EMG6726/8726-B10A User’s Guide
69
Figure 26 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode)
The following table describes the labels in this screen.
Table 12 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode)
LABEL DESCRIPTION
General
Active Select Enable to activate this WAN interface.
Name Specify a descriptive name for this connection.
Type Select an Ethernet connection.
Mode Select Routing if your ISP give you one IP address only and you want multiple computers to share
an Internet account.
Encapsulation Select the method of encapsulation used by your ISP from the drop-down list box. This option is
available only when you select Routing in the Mode field.
The choices are PPPoE and IPoE.
To Next Page
Loading...
