If traffic should hit Voice VLAN criteria,
l Verify that Voice VLAN is enabled.
l Verify that traffic is sent to the destination’s VLAN.
Using Web GUI:
Figure 22 Advance Application > VLAN > VLAN Configuration > Voice VLAN
Setup
Using CLI:
Figure 23 Enter CLI command “show voice-vlan”
l Verify that device with issue’s MAC address hits the OUI address.
l Verify that the OUI mask is configured according to the correct format.
Using Web GUI:
Figure 24 Advance Application > VLAN > VLAN Configuration > Voice VLAN
Setup
To Next Page
Loading...
