Figure 4 Advance Application > Multicast > IPv4 Multicast > IGMP Snooping
Using CLI:
Figure 5 Layer 3 IGMP Routing
Figure 6 Layer 2 IGMP Snooping
!
!
If IGMP “unknown multicast frame: drop” is not enabled on the switches between
server clients, reconfigure the switches and repeat step 1.
If IGMP “unknown multicast frame: drop” is already enabled, go to step 3.
Can multicast clients receive stream without problems?
Verify this by watching the video and switching channels on the set-top box.
If video quality is still poor or clients lose stream at irregular intervals, go to <OTHERS>.
If no issues occur, proceed to the next agenda.
To Next Page
Loading...
