Perform an IGMP Join/Leave from the multicast client.
Access the multicast client with issue (usually the set-top box of an IPTV), and start
changing IPTV from one channel to the channel with the multicast issue (if any).
Every time a channel changes, the set-top box sends an IGMP Join for the new
channel as well an IGMP Leave for the old channel.
Figure 28 !
* Figure shows what occurs when a channel is changed through an IPTV’s
point of view.
After performing an IGMP Join/Leave, proceed to step 5.
To Next Page
Loading...
