Using Web GUI:
Figure 8 Advance Application > Multicast
Using CLI:
Figure 9
If the switch can receive the IGMP Join/Leave in the Multicast VLAN ID, proceed to
step 6.
If the switch cannot receive the IGMP Join/Leave, go to step 10.
Can the multicast client receive the multicast stream?
If both multicast stream and IGMP join/leave reaches this switch, then the multicast
client with issue should most likely be able to watch the channel through the IPTV.
If the multicast client can now receive the multicast stream, repeat the Multicast
Troubleshooting section.
If the multicast client still can receive the multicast stream, go to<OTHERS>.
To Next Page
Loading...
