Is the multicast stream being sent in the multicast VLAN
ID?
Make sure that the Multicast VLAN ID matches the multicast stream’s VLAN. If the
multicast stream does not contain any VLAN tags, then multicast stream will be
processed through this port’s PVID.
Using Web GUI:
Figure 12 Advance Application > Multicast > MVR
Using CLI:
Figure 13
If the switch’s Multicast VLAN ID matches the multicast stream’s VLAN, go to step 10.
If the switch’s Multicast VLAN ID does not match the multicast stream’s VLAN,
reconfigure and repeat step 3.
To Next Page
Loading...
