Using CLI:
Figure 16
If the MVR ports are configured correctly, go to step 11.
If the MVR ports are not configured correctly, reconfigure and repeat step 3.
Is the multicast stream within the MVR group address
range?
The MVR group address range allows the IGMP join/leave for this specific address
range from multicast clients to be forwarded across the Multicast VLAN ID. If the
IGMP join/leave is not within the MVR group address range, then these will be
forwarded across the PVID instead.
Using Web GUI:
Figure 17 Advance Application > Multicast > MVR > Group Configuration
To Next Page
Loading...
