Chapter 2 Hardware Description and Connection
ES1100 Series User’s Guide
18
Attaching the Mounting Brackets to the Switch
1 Position a mounting bracket on one side of the Switch, lining up the four screw holes on the bracket
with the screw holes on the side of the Switch.
Figure 8 Attaching the Mounting Brackets (ES1100-8P/ 16/ 16P/ 24E)
Figure 9 Attaching the Mounting Brackets (ES1100-24)
2 Using a # 2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes
into the Switch.
3 Repeat steps
1 and 2 to install the second mounting bracket on the other side of the Switch.
4 You may now mount the Switch on a rack. Proceed to the next section.
To Next Page
Loading...
