Chapter 2 Hardware Description and Connection
ES1100 Series User’s Guide
19
2.3.3 Mounting the Switch on a Rack
1 Position a mounting bracket (that is already attached to the Switch) on one side of the rack, lining
up the two screw holes on the bracket with the screw holes on the side of the rack.
Figure 10 Mounting the Switch on a Rack (ES1100-8P/ 16/ 16P/24E)
Figure 11 Mounting the Switch on a Rack (ES1100-24)
2 Using a # 2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes
into the rack.
3 Repeat steps
1 and 2 to attach the second mounting bracket on the other side of the rack.
To Next Page
Loading...
