Chapter 7 Wireless
EX3510-B0 User’s Guide
94
Note: If upstream/downstream bandwidth is empty, the Zyxel Device sets the value
automatically. Setting a maximum upstream/downstream bandwidth will significantly
decrease wireless performance.
Click the Edit icon next to an SSID in the Guest/More AP screen. The following screen displays.
Figure 52 Network Setting > Wireless > Guest/More AP > Edit
The following table describes the fields in this screen.
Table 23 Network Setting > Wireless > Guest/More AP > Edit
LABEL DESCRIPTION
Wireless Network Setup
Wireless Click this switch to enable or disable WiFi in this field. When the switch turns blue , the
function is enabled; otherwise, it is not.
To Next Page
Loading...
