ZyXEL Communications G-202 User Manual (English)

Other manuals for ZyXEL Communications G-202

User Guide123 pages

Quick Start Guide3 pages

Declaration Of Conformity1 page

Questions and Answers:

B
brownbenjaminJul 30, 2025
Why is the link quality or signal strength poor on my ZyXEL Communications G-202?
- K
  kleonardJul 30, 2025
  Poor link quality or signal strength on your ZyXEL Communications Adapter could be due to radio interference, such as from a microwave or another access point using the same channel. To improve this: * Search for and connect to another access point with better link quality using the Site Survey screen. * Move your computer closer to the access point or peer computers within the transmission range. * Lower the output power of each access point. * Ensure not too many wireless stations are connected to a wireless network.
G
greglawrenceAug 9, 2025
What to do if wireless stations cannot associate to the G-202 in access point mode of ZyXEL Communications Adapter?
- W
  wisemelissaAug 9, 2025
  If wireless stations can't connect to the G-202 in access point mode, verify the following: * The computer with the G-202 is turned on. * The wireless stations use the same SSID as the G-202. * The wireless stations use the same security settings. * The wireless stations are not blocked in the MAC Filter screen.
P
Patrick SmithAug 14, 2025
What to do if I cannot scan or connect to any access points using Windows XP configuration tool with ZyXEL Communications Adapter?
- L
  Lindsay AlexanderAug 14, 2025
  If you cannot scan or connect to any access points using the Windows XP configuration tool, it might be because the G-202 is still in access point mode. Ensure you set the G-202 to operate in station mode before closing the ZyXEL utility.
M
Michele RossAug 19, 2025
How to fix ZyXEL Communications G-202 Adapter utility icon not displaying?
- T
  Tracy CrosbyAug 19, 2025
  If the ZyXEL utility icon does not display, and you have Funk Odyssey Client software installed, uninstall both the Funk Odyssey Client software and the ZyXEL utility. Then, restart your computer and reinstall the ZyXEL utility.
J
Julie SchultzAug 25, 2025
How to troubleshoot if cannot start ZyXEL Communications G-202 Wireless LAN utility?
- Y
  ywalkerAug 25, 2025
  If you cannot start the ZyXEL Wireless LAN utility: * Ensure the G-202 is properly inserted and the LED(s) is on. Refer to the Quick Start Guide for LED descriptions. * Use the Device Manager to check for hardware conflicts (Start, Settings, Control Panel, System, Hardware, Device Manager; steps may vary depending on Windows version). Verify the status of the G-202 under Network Adapter. * Install the G-202 in another computer. If the issue persists, it may be a hardware problem, and you should contact your local vendor.