GS1100 Series User’s Guide 5
CHAPTER 1
Getting to Know Your Switch
1.1 Introduction
This chapter describes the key features, benefits and applications of your Switch.
This User’s Guide covers the following models: GS1100-8HP, GS1100-16, GS1100-24, and GS1100-
24E. The Switch is a 10/100/1000 Mbps multi-port switch that can be used to build high-
performance switched workgroup networks. The Switch is a store-and-forward device that offers
low latency for high-speed networking. The Switch is fanless and designed for workgroups,
departments or backbone computing environments for small businesses.
The GS1100-8HP has four GbE PoE ports that can supply power to the connected PoE powered
devices.
The GS1100-24 has two SFP slots for uplink connection. Use SFP transceivers in these slots for
100Mbps or 1Gbps connections to backbone Ethernet switches.
The Switch has a built-in algorithm that automatically assigns priority to received packets. It can
operate in low power idle mode in compliance with IEEE 802.3az Energy Efficient Ethernet (EEE).
Table 1 GS1100 Series Comparison Table
PORT/SWITCH DETAILS GS1100-8HP GS1100-16 GS1100-24 GS1100-24E
8 10/100/1000Base-T Ethernet ports
(including 4 PoE ports)
16 10/100/1000Base-T Ethernet ports
24 10/100/1000Base-T Ethernet ports
2 100/1000Base-X SFP slots
One physical IEEE 802.3az ON/OFF button
One power ON/OFF switch
To Next Page
Loading...
