Chapter 2 Hardware Description and Connection
GS1100 Series User’s Guide
16
Figure 12 Attaching the Mounting Brackets (GS1100-16 and GS1100-24E)
Figure 13 Attaching the Mounting Brackets (GS1100-24)
2 Using a # 2 Philips screwdriver, install the M3 flat head screws through the mounting bracket holes
into the Switch.
3 Repeat steps
1 and 2 to install the second mounting bracket on the other side of the Switch.
4 You may now mount the Switch on a rack. Proceed to the next section.
2.3.3 Mounting the Switch on a Rack
1 Position a mounting bracket (that is already attached to the Switch) on one side of the rack, lining
up the two screw holes on the bracket with the screw holes on the side of the rack.
To Next Page
Loading...
