GS1100 Series User’s Guide
8
CHAPTER 2
Hardware Description and Connection
2.1 Rear Panel
The power receptacle is located on the rear panel of the Switch. Refer to the power supply
requirements on the panel.
Figure 5 Rear Panel
2.1.1 Rear Panel Power Connection
Connect one end of the supplied power cord or power adaptor to the power receptacle on the back
of the Switch and the other end to the appropriate power source.
For the GS1100-8HP, GS1100-16, GS1100-24E and GS1100-10HP, use the POW ER ON/ OFF
switch to have the Switch power on or off.
GS1100-16
GS1100-24
GS1100-8HP
GS1100-24E
GS1100-10HP
To Next Page
Loading...
